Continuous oven above 1000˚C
In such ovens the products travel through the oven and are heated, as well as, depending on the process, cooled-down inside the oven.
Transport through the oven can take place either through the use of carts, roller hearths or chains, carriers and slats.
Rotary oven
“For direct or indirect heating of fine materials.”
Intended to heat fine materials such as balls, chippings, mulch, pallets etc.
The materials enter the rotary drum in the front part, they are then heated and finally exits the drum heated through an opening.
The heating can be executed directly – with the burner in the centre of the drum – or indirectly with burners in the coat.
Rotary quenching oven
“Recuperative burner and good sealing for a high energy efficiency.”
In entering the drum the granular material shuts down the air supply to the drum with its density – ensuring a controlled atmosphere in the drum.
The area containing the most granular material can be heated through a special angle of the burner.
The angle and the number of baffles define the speed with which the granular material moves through the drum.
Material can fall into the water or thermal oil.
Energy efficiency is achieved through proper sealing and the use of the recuperative burner.
Due to the specific way the sensors are built-in, we can ensure the evenness of the material, despite the extremely varying demands of clients with regard to the granular material flow.
Quality granular material can be created even with 1:3 flow oscillation ratio.
Granulate temperatures:
Material nominal flow:
Continuous oven above 1000˚ C
In such ovens the products travel through the oven and are heated, as well as, depending on the process, cooled-down inside the oven.
Transport through the oven can take place either through the use of carts, roller hearths or chains, carriers and slats.
Rotary oven
“For direct or indirect heating of fine materials.”
Intended to heat fine materials such as balls, chippings, mulch, pallets etc.
The materials enter the rotary drum in the front part, they are then heated and finally exits the drum heated through an opening.
The heating can be executed directly – with the burner in the centre of the drum – or indirectly with burners in the coat.
Rotary quenching oven
“Recuperative burner and good sealing for a high energy efficiency.”
In entering the drum the granular material shuts down the air supply to the drum with its density – ensuring a controlled atmosphere in the drum.
The area containing the most granular material can be heated through a special angle of the burner.
The angle and the number of baffles define the speed with which the granular material moves through the drum.
Material can fall into the water or thermal oil.
Energy efficiency is achieved through proper sealing and the use of the recuperative burner.
Due to the specific way the sensors are built-in, we can ensure the evenness of the material, despite the extremely varying demands of clients with regard to the granular material flow.
Quality granular material can be created even with 1:3 flow oscillation ratio.
